New Enough, LTD - Best Deals

Sidi Escape Boots

Paul at New Enough, LTD — Mon, 08 Feb 2010 09:24:12 -0600

Sidi Escape Boots

Boot constructed of Lorica synthetic leather and Cordura mesh panels for maximum flexibility
Inner protection plates at the toe and heel
Interior ankle padding
Firm Nylon innersole with removable arch support
Secure hook and loop closure system
Reflective panel on heel for night-time visibility

MSRP:

$165.00

, View Product Page for Pricing

Joe Rocket Honda Endurance Textile Jacket

Paul at New Enough, LTD — Mon, 08 Feb 2010 09:18:32 -0600

Joe Rocket Honda Endurance Textile Jacket

Rock Tex 660 and 330 outer shell
100% waterproof
C.E. rated protectors in shoulders and elbows
Removable spine pad with pocket for optional C.E. spine protector
Variable Flow ventilation system
Removable insulated full sleeve liner
Elastic sleeve adjusters
Sure Fit adjustable waistband
Pocket for audio device with port for wire
8” rear zipper for pant attachment
Reflective stripe

MSRP:

$249.99 - $264.99

, View Product Page for Pricing

Icon Merc Leather Hero Jacket

Paul at New Enough, LTD — Fri, 05 Feb 2010 10:02:06 -0600

Icon Merc Leather Hero Jacket

Durable leather chassis
Custom TPR sponsor badging
Tailored fit for aggressive riders
CE approved elbow/shoulder armor
Removable insulated windproof liner
Strategically placed perforated leather for breathability
Stretch Cordura panels for increased mobility

MSRP:

$385.00

, View Product Page for Pricing

Icon Merc Leather Jacket

Paul at New Enough, LTD — Fri, 05 Feb 2010 10:01:40 -0600

Icon Merc Leather Jacket

Durable leather chassis
Tailored fit for aggressive riders
CE approved elbow/shoulder armor
Removable insulated windproof liner
Strategically placed perforated leather for breathability
Stretch Cordura panels for increased mobility

MSRP:

$290.00

, View Product Page for Pricing

Joe Rocket Honda CBR Textile Jacket

Paul at New Enough, LTD — Wed, 03 Feb 2010 09:26:19 -0600

Joe Rocket Honda CBR Textile Jacket

Rock Tex 660 outer shell
C.E. rated protectors in shoulders and elbows
Removable spine pad with pocket for optional C.E. spine protector
Variable Flow ventilation system
Removable insulated vest liner
Elastic sleeve adjusters
Sure Fit adjustable waistband
8” rear zipper for pant attachment
Reflective stripe
Pocket for audio device with port for wire
Pocket for face shield storage

MSRP:

$199.99 - $214.99

, View Product Page for Pricing

Scorpion EXO400 Tsunami Helmet

Paul at New Enough, LTD — Mon, 01 Feb 2010 10:15:34 -0600

Scorpion EXO-400 Tsunami Helmet

Advanced Polycarbonate Composite Engineered Shell: quiet, aero-tuned design for wind-tunnel tested comfort; EPS-lined chin bar for additional protection

SpeedShift quick-change shield system (patent pending): easy, secure tool-less faceshield changes in ten seconds or less

EverClear no-fog faceshield: optically-correct shield with state-of-the art fog-free technology and anti-scratch hardened coating

KwikWick moisture-wicking helmet liner and cheek pads: breathable, easily removable and washable

Ventilation system: adjustable, indexed front and rear vents with aero-tuned rear spoiler reduce lift, create vacuum and maximize airflow through helmet

Breath-deflector: enhanced fog-free performance

Custom liner and cheek pad kits: available in hot colors and wild patterns

Snell/DOT Certified; size 3X DOT Certified only

MSRP:

$169.95

, View Product Page for Pricing

Alpinestars PRock Leather Jacket

Paul at New Enough, LTD — Thu, 28 Jan 2010 20:02:11 -0600

Alpinestars P-Rock Leather Jacket

1.2 to 1.4mm full-grain leather for excellent abrasion resistance
Abrasion resistant textile panels for lighter weight composition
Removable CE-certified shoulder and elbow protectors
Removable thermal vest
Sport fit
External and internal pockets
Wrist and waist adjustments
Waist connection zipper allows attachment to selected Alpinestars leather pants
Back protector compartment with a foam back pad (CE-certified RC back protector available separately)

MSRP:

$359.95

, View Product Page for Pricing

Scorpion Strike Textile Jacket

Paul at New Enough, LTD — Wed, 27 Jan 2010 08:58:52 -0600

Scorpion Strike Textile Jacket

A waterproof 600-denier ballistic nylon shell with Exo-Stitch™ taped seams keeps this jacket going strong
Exo-Tech™ armor in critical impact areas provides protection
A full ventilation system complete with zippered vents keeps you cool
A removable EverHeat™ Thermoliner lets you add warmth when you need it
A KwikWick® liner keeps you dry and comfortable

MSRP:

$199.95 - $224.95

, View Product Page for Pricing

Scorpion Burnout Textile Jacket

Paul at New Enough, LTD — Wed, 27 Jan 2010 08:58:33 -0600

Scorpion Burnout Textile Jacket

600-denier EXO water-resistant ballistic nylon shell
Exo-Stitched
Exclusive ventilated CE-approved armor
Removable Thermoliner

MSRP:

$159.95 - $171.95

, View Product Page for Pricing

Scorpion Stinger Leather Jacket

Paul at New Enough, LTD — Wed, 27 Jan 2010 08:50:19 -0600

Scorpion Stinger Leather Jacket

Matte, titanium-tanned, drum-dyed, top-grain, race-weight 1.2-1.4mm leather (aero-dimpled on the shoulders) with unique asymmetrical tattoo-inspired, screened graphics and embroidered trim
Full-flow perforated leather provides maximum cooling in hot weather, and a removable KwikWick Thermoliner deals with cool conditions
Race-fit tapered silhouette powerstretch waist panels and Terramid® Kevlar® stretch panels keep the fit snug and aero, and a belt loop at the waist provides optional hookup to jeans
CE-approved ventilated armor guards all critical impact areas while it lets heat and sweat escape

Note on Pricing: The Black/Blue and Black/Red versions of this jacket are now on sale. The price of the Black/Black. Black Phantom and Black/White represents the normal MSRP pricing.

MSRP:

$379.95 - $406.95

, View Product Page for Pricing

Scorpion Hat Trick MeshTextile Jacket

Paul at New Enough, LTD — Wed, 27 Jan 2010 08:33:49 -0600

Scorpion Hat Trick Mesh/Textile Jacket

NightViz reflective panels front and back for visibility
Two inside and two outside pockets for all your cargo
Cool, tattoo-inspired asymmetrical screened and embroidered graphics give a total custom look
CE-approved ventilated armor guards all critical impact areas while it lets heat and sweat escape
Exo-Stitch safety seams in critical areas provide maximum structural integrity
Powerstretch and snap waist adjustment system for custom fit, and a belt loop to hook up to your jeans
Two removable liners: one Thermoliner, one breathable waterproof liner

Note on Pricing: The Blue, Red and Yellow versions of this jacket are now on sale. The price of the Black and Black Phantom represents the normal MSRP pricing.

MSRP:

$229.95 - $254.95

, View Product Page for Pricing

HJC CL15 Pegasus Helmet

Paul at New Enough, LTD — Mon, 25 Jan 2010 09:18:42 -0600

HJC CL-15 Pegasus Helmet

Shell features:

Lightweight Injection-Molded Polycarbonate Composite Shell which meets or exceeds Snell 2005 & DOT standards
Channeled dual density EPS liner
Wind tunnel tested aerodynamic shell shape with an extra large eye port opening for greater visibility
Three shell sizes for a more comfortable fit

Interior Features:

Removable/washable Nylex® cheek pads and comfort liner remove easily for cleaning
Optional cheek pad sizes to achieve a “custom fit”
Streamline, wrap around neck roll reduces wind noise
Padded chin strap design with nylon strap retention snap to neatly secure excess chin strap length
Built-in communication system speaker cavity

Shield Features:

Two-stage pivot mechanism compresses the shield into the eye port gasket providing an extremely secure seal
Improved, no guess work, tool-less shield removal and installation
Aerodynamic flush mounted fit for reduced turbulence
Scratch resistant hard coated shield
Optically superior 3D design
Rated at 95% UV resistant

Venting Features:

Flow through advanced channeling ventilation system with dual flow-through channels and two high capacity, multi-stage forehead intake vents
Two rear Venturi exhaust vents
Anti-fog system with adjustable side chin bar mounted vortex vents creating a low-pressure vacuum effect drawing heat and moisture out of the face shield area
Adjustable chin vent re-directs air upward and across shield interior

MSRP:

$144.99 - $149.99

, View Product Page for Pricing

HJC CL15 Mutant Helmet

Paul at New Enough, LTD — Mon, 25 Jan 2010 09:17:45 -0600

HJC CL-15 Mutant Helmet

Shell features:

Lightweight Injection-Molded Polycarbonate Composite Shell which meets or exceeds Snell M2005 & DOT standards
Channeled dual density EPS liner
Wind tunnel tested aerodynamic shell shape with an extra large eye port opening for greater visibility
Three shell sizes for a more comfortable fit

Interior Features:

Removable/washable Nylex® cheek pads and comfort liner remove easily for cleaning
Optional cheek pad sizes to achieve a “custom fit”
Streamline, wrap around neck roll reduces wind noise
Padded chin strap design with nylon strap retention snap to neatly secure excess chin strap length
Built-in communication system speaker cavity

Shield Features:

Two-stage pivot mechanism compresses the shield into the eye port gasket providing an extremely secure seal
Improved, no guess work, tool-less shield removal and installation
Aerodynamic flush mounted fit for reduced turbulence
Scratch resistant hard coated shield
Optically superior 3D design
Rated at 95% UV resistant

Venting Features:

Flow through advanced channeling ventilation system with dual flow-through channels and two high capacity, multi-stage forehead intake vents
Two rear Venturi exhaust vents
Anti-fog system with adjustable side chin bar mounted vortex vents creating a low-pressure vacuum effect drawing heat and moisture out of the face shield area
Adjustable chin vent re-directs air upward and across shield interior

MSRP:

$139.99 - $144.99

, View Product Page for Pricing

HJC CL15 Draco Helmet

Paul at New Enough, LTD — Mon, 25 Jan 2010 09:17:29 -0600

HJC CL-15 Draco Helmet

Shell features:

Lightweight Injection-Molded Polycarbonate Composite Shell which meets or exceeds Snell M2005 & DOT standards
Channeled dual density EPS liner
Wind tunnel tested aerodynamic shell shape with an extra large eye port opening for greater visibility
Three shell sizes for a more comfortable fit

Interior Features:

Removable/washable Nylex® cheek pads and comfort liner remove easily for cleaning
Optional cheek pad sizes to achieve a “custom fit”
Streamline, wrap around neck roll reduces wind noise
Padded chin strap design with nylon strap retention snap to neatly secure excess chin strap length
Built-in communication system speaker cavity

Shield Features:

Two-stage pivot mechanism compresses the shield into the eye port gasket providing an extremely secure seal
Improved, no guess work, tool-less shield removal and installation
Aerodynamic flush mounted fit for reduced turbulence
Scratch resistant hard coated shield
Optically superior 3D design
Rated at 95% UV resistant

Venting Features:

Flow through advanced channeling ventilation system with dual flow-through channels and two high capacity, multi-stage forehead intake vents
Two rear Venturi exhaust vents
Anti-fog system with adjustable side chin bar mounted vortex vents creating a low-pressure vacuum effect drawing heat and moisture out of the face shield area
Adjustable chin vent re-directs air upward and across shield interior

MSRP:

$139.99 - $144.99

, View Product Page for Pricing

HJC CL15 Cyclone Helmet

Paul at New Enough, LTD — Mon, 25 Jan 2010 09:17:11 -0600

HJC CL-15 Cyclone Helmet

Shell features:

Lightweight Injection-Molded Polycarbonate Composite Shell which meets or exceeds Snell M2005 & DOT standards
Channeled dual density EPS liner
Wind tunnel tested aerodynamic shell shape with an extra large eye port opening for greater visibility
Three shell sizes for a more comfortable fit

Interior Features:

Removable/washable Nylex® cheek pads and comfort liner remove easily for cleaning
Optional cheek pad sizes to achieve a “custom fit”
Streamline, wrap around neck roll reduces wind noise
Padded chin strap design with nylon strap retention snap to neatly secure excess chin strap length
Built-in communication system speaker cavity

Shield Features:

Two-stage pivot mechanism compresses the shield into the eye port gasket providing an extremely secure seal
Improved, no guess work, tool-less shield removal and installation
Aerodynamic flush mounted fit for reduced turbulence
Scratch resistant hard coated shield
Optically superior 3D design
Rated at 95% UV resistant

Venting Features:

Flow through advanced channeling ventilation system with dual flow-through channels and two high capacity, multi-stage forehead intake vents
Two rear Venturi exhaust vents
Anti-fog system with adjustable side chin bar mounted vortex vents creating a low-pressure vacuum effect drawing heat and moisture out of the face shield area
Adjustable chin vent re-directs air upward and across shield interior

MSRP:

$139.99 - $144.99

, View Product Page for Pricing

HJC CL15 Solid Helmet

Paul at New Enough, LTD — Mon, 25 Jan 2010 09:12:17 -0600

HJC CL-15 Solid Helmet

Shell features:

Lightweight Injection-Molded Polycarbonate Composite Shell which meets or exceeds Snell M2005 & DOT standards
Channeled dual density EPS liner
Wind tunnel tested aerodynamic shell shape with an extra large eye port opening for greater visibility
Three shell sizes for a more comfortable fit

Interior Features:

Removable/washable Nylex® cheek pads and comfort liner remove easily for cleaning
Optional cheek pad sizes to achieve a “custom fit”
Streamline, wrap around neck roll reduces wind noise
Padded chin strap design with nylon strap retention snap to neatly secure excess chin strap length
Built-in communication system speaker cavity

Shield Features:

Two-stage pivot mechanism compresses the shield into the eye port gasket providing an extremely secure seal
Improved, no guess work, tool-less shield removal and installation
Aerodynamic flush mounted fit for reduced turbulence
Scratch resistant hard coated shield
Optically superior 3D design
Rated at 95% UV resistant

Venting Features:

Flow through advanced channeling ventilation system with dual flow-through channels and two high capacity, multi-stage forehead intake vents
Two rear Venturi exhaust vents
Anti-fog system with adjustable side chin bar mounted vortex vents creating a low-pressure vacuum effect drawing heat and moisture out of the face shield area
Adjustable chin vent re-directs air upward and across shield interior

MSRP:

$129.99 - $134.99

, View Product Page for Pricing

HJC CL15 Metallic Helmet

Paul at New Enough, LTD — Mon, 25 Jan 2010 09:11:49 -0600

HJC CL-15 Metallic Helmet

Shell features:

Lightweight Injection-Molded Polycarbonate Composite Shell which meets or exceeds Snell M2005 & DOT standards
Channeled dual density EPS liner
Wind tunnel tested aerodynamic shell shape with an extra large eye port opening for greater visibility
Three shell sizes for a more comfortable fit

Interior Features:

Removable/washable Nylex® cheek pads and comfort liner remove easily for cleaning
Optional cheek pad sizes to achieve a “custom fit”
Streamline, wrap around neck roll reduces wind noise
Padded chin strap design with nylon strap retention snap to neatly secure excess chin strap length
Built-in communication system speaker cavity

Shield Features:

Two-stage pivot mechanism compresses the shield into the eye port gasket providing an extremely secure seal
Improved, no guess work, tool-less shield removal and installation
Aerodynamic flush mounted fit for reduced turbulence
Scratch resistant hard coated shield
Optically superior 3D design
Rated at 95% UV resistant

Venting Features:

Flow through advanced channeling ventilation system with dual flow-through channels and two high capacity, multi-stage forehead intake vents
Two rear Venturi exhaust vents
Anti-fog system with adjustable side chin bar mounted vortex vents creating a low-pressure vacuum effect drawing heat and moisture out of the face shield area
Adjustable chin vent re-directs air upward and across shield interior

MSRP:

$134.99 - $139.99

, View Product Page for Pricing

HJC CL15 Matte Helmet

Paul at New Enough, LTD — Mon, 25 Jan 2010 09:11:24 -0600

HJC CL-15 Matte Helmet

Shell features:

Lightweight Injection-Molded Polycarbonate Composite Shell which meets or exceeds Snell M2005 & DOT standards
Channeled dual density EPS liner
Wind tunnel tested aerodynamic shell shape with an extra large eye port opening for greater visibility
Three shell sizes for a more comfortable fit

Interior Features:

Removable/washable Nylex® cheek pads and comfort liner remove easily for cleaning
Optional cheek pad sizes to achieve a “custom fit”
Streamline, wrap around neck roll reduces wind noise
Padded chin strap design with nylon strap retention snap to neatly secure excess chin strap length
Built-in communication system speaker cavity

Shield Features:

Two-stage pivot mechanism compresses the shield into the eye port gasket providing an extremely secure seal
Improved, no guess work, tool-less shield removal and installation
Aerodynamic flush mounted fit for reduced turbulence
Scratch resistant hard coated shield
Optically superior 3D design
Rated at 95% UV resistant

Venting Features:

Flow through advanced channeling ventilation system with dual flow-through channels and two high capacity, multi-stage forehead intake vents
Two rear Venturi exhaust vents
Anti-fog system with adjustable side chin bar mounted vortex vents creating a low-pressure vacuum effect drawing heat and moisture out of the face shield area
Adjustable chin vent re-directs air upward and across shield interior

MSRP:

$134.99 - $139.99

, View Product Page for Pricing

Joe Rocket Womens Michael Jordan 2K7 Gloves

Paul at New Enough, LTD — Fri, 22 Jan 2010 09:42:30 -0600

Joe Rocket Women's Michael Jordan 2K7 Gloves

Drum dyed leather top
Perforated leather palm with Chamude reinforcement
Internally molded knuckle and finger protectors
Hook and loop wrist strap

MSRP:

$59.99

, View Product Page for Pricing

Joe Rocket Womens Michael Jordan 2K7 Team Replica Leather Jacket

Paul at New Enough, LTD — Fri, 22 Jan 2010 09:31:31 -0600

Joe Rocket Women's Michael Jordan 2K7 Team Replica Leather Jacket

1.2 to 1.4mm cowhide
CE rated protectors in shoulders and elbows
Removable spine pad with pocket for optional CE spine protector
Full Flex™ windproof sleeve panels
Variable Flow™ ventilation system
Removable insulated vest liner
360º plus 8” zipper for pant attachment
Sure Fit™ adjustable waistband
Reflective Stripe

MSRP:

$499.99

, View Product Page for Pricing

Joe Rocket Womens Michael Jordan 2K7 Team Replica Textile Jacket

Paul at New Enough, LTD — Fri, 22 Jan 2010 09:26:29 -0600

Joe Rocket Women's Michael Jordan 2K7 Team Replica Textile Jacket

Wind and water resistant HiTena™ nylon outer shell
CE rated protectors in shoulders and elbows
Removable spine pad with pocket for optional CE spine protector
Variable Flow™ ventilation system
Removable insulated vest liner
Sure Fit™ adjustable waistband
8” zipper for pant attachment
Reflective stripe

Note on Pricing: We are offering a lower price on some size color selections of this jacket because we have a LOT more of those sizes/colors in our stock and we want to balance our inventory.

MSRP:

$249.99

, View Product Page for Pricing

Joe Rocket Womens Michael Jordan 2K7 Team Replica Mesh Jacket

Paul at New Enough, LTD — Fri, 22 Jan 2010 09:21:34 -0600

Joe Rocket Women's Michael Jordan 2K7 Team Replica Mesh Jacket

Free Air™ poly/mesh shell
Removable windproof liner
C.E. rated protectors in shoulders and elbows
Removable spine pad with pocket for optional C.E. spine protector
Sure Fit™ adjustable waistband
8” zipper for pant attachment
Reflective piping

MSRP:

$199.99

, View Product Page for Pricing

Scorpion AllIn Leather Jacket

Paul at New Enough, LTD — Wed, 20 Jan 2010 09:03:07 -0600

Scorpion All-In Leather Jacket

Washed vintage race-weight (1.2-1.4mm), drum-dyed, top-grain leather
Unique asymmetrical tattoo-inspired screened graphics and embroidered trim
Straight cut (non-tapered) design accommodates all kinds of bikes and human body styles
Adjustable waist gusset allows a custom fit, and a belt loop at the waist provides optional hookup to jeans
Exo-Tec CE-approved ventilated armor protects all impact areas while it lets heat and sweat escape
Removable KwikWick™ Thermoliner helps regulate your temperature in cool conditions, and AirVent zippered ventilation system lets air flow through on hot days

MSRP:

$399.95 - $427.95

, View Product Page for Pricing

Icon TiMax 2 Textile Jacket

Paul at New Enough, LTD — Wed, 13 Jan 2010 08:06:56 -0600

Icon TiMax 2 Textile Jacket

Durable Dynax® nylon chassis
Genuine titanium armor plating for increased protection
Titanium reinforced textile panels in critical areas
CE approved elbow
Reverse action back for a no-bind fit
Zippered shoulder intake vents
Large mesh back panel for heat reduction
Ribbed spandex in flex zones for comfort
Removable insulated liner for cold weather riding

MSRP:

$350.00

, View Product Page for Pricing

Icon Domain Solid Helmet

Paul at New Enough, LTD — Mon, 11 Jan 2010 08:44:53 -0600

Icon Domain Solid Helmet

Ventilation is handled by a multitude of ram-air ducts and Venturi venting channels
Unique lower chin air intake routes air to the shield for defogging
Large rear exhaust ports route hot air out of helmet
Shell is constructed of a carbon fiber/ Dyneema/Aramid® composite for superior strength-to-weight relationship
Comfort liner is fully removable and washable
Removable molded breath deflector reduces shield fogging
Removable chin curtain seals out unwanted turbulence
Quick change fog-free eye shield
DOT and SNELL approved

MSRP:

$255.00

, View Product Page for Pricing

Alpinestars Stunt 2 Leather Jacket

Paul at New Enough, LTD — Thu, 07 Jan 2010 09:54:35 -0600

Alpinestars Stunt 2 Leather Jacket

1.2 to 1.4mm full-grain leather for excellent abrasion resistance
Multiple stitched main-seam construction for maximum tear resistance
Removable CE-certified shoulder and elbow protectors
Ergonomically placed stretch panels for optimal comfort and fit
Pre-curved sleeves for riding position comfort
Perforated leather panels for ventilation
Rear reflective piping and microinjected logos for nighttime visibility
Removable thermal vest
Adjustable waist
Connection zipper allows attachment to selected Alpinestars leather pants

MSRP:

$369.95

, View Product Page for Pricing

Joe Rocket Ballistic 70 Textile Jacket

Paul at New Enough, LTD — Tue, 05 Jan 2010 09:20:54 -0600

Joe Rocket Ballistic 7.0 Textile Jacket

Heavy duty 630 Hitena® twill nylon outer
100% waterproof
C.E. rated protectors in shoulders and elbows
Removable spine pad with pocket for optional C.E. spine protector
Variable Flow™ ventilation system
Cross Linked Ventilation™ with Wind Tunnel cooling
Removable insulated full sleeve liner
Sure Fit™ adjustable waistband
8” zipper for pant attachment
Reflective stripe

MSRP:

$249.99 - $269.99

, View Product Page for Pricing

Joe Rocket Atomic 30 Textile Jacket

Paul at New Enough, LTD — Tue, 05 Jan 2010 09:20:36 -0600

Joe Rocket Atomic 3.0 Textile Jacket

Heavy duty 630 Hitena® twill nylon outer
C.E. rated protectors in shoulders and elbows
Removable dual density spine pad (can be replaced with optional C.E. spine protector)
Cross Linked™ Variable Flow™ ventilation system
Elastic sleeve adjusters
Sure Fit™ adjustable waistband
Belt loops for pant attachment
Reflective stripe

MSRP:

$149.99 - $164.99

, View Product Page for Pricing