Held Storm Gloves
Moved to the Bargain Basement because… we are down to just small sizes and large sizes and we need to clear these out!
- Waterproof summer touring glove
- Waterproof and breathable Gore-Tex membrane
- Colorfast Pittards WR100 leather palm
- Schoeller WB formula stretch fabric back for flexibility
- Knuckles and side of hand are protected with Pittards leather
- 3M Scotchlite reflective piping
- Rubber visor wiper on left index finger
More Info: this document from Held explains some of the features listed above.
(not all Held models have all the features listed; use your back button after viewing)
Share this page on Twitter!
View Larger ImagesCheck out these similar products:
Sizing Information
Held gloves are sold in sizes that correspond to your hand measurement. Or, by using the chart below, you can choose a size based upon the size you normally wear in other gloves (most other gloves are sold in “alpha” sizes):
| Held Glove Size | Equivalent Alpha Size | Actual Hand Measurement |
| 7 | Small | 6.5” to 7” |
| 8 | Medium | 7.5 to 8 |
| 9 | Large | 8.5 to 9 |
| 10 | XL | 9.5 to 10 |
| 11 | XXL | 10 to 11 |
| 12 | XXXL | 11 to 12 |
Our Two Cents
A lot of folks ask for waterproof gloves for mild to warm weather use and almost all waterproof designs are insulated as well. So we were lucky to find this leather/textile warm weather waterproof glove from Held on closeout. Inventory is very limited and we purchased all the distributor had left, so check the drop down menu above for sizes still available. The shell of this glove is mostly textile on the back of the hand and it’s full leather in the palm. The leather used is a very soft suede-like finish by Pittards (a very popular brand name of leather commonly used in better motorcycle gloves). The inside of the glove is lined with a soft nylon fabric. And of course between the shell and lining is the Gore-Tex waterproof/breathable liner to make the gloves waterproof. The backs of the hands have plenty of reflective piping for night time visibility.
