Vanson Cobra Mark 2 Leather Jacket

Vanson jackets are sized generously through the torso and will accommodate a chest consistent with the stated chest size of the jacket (measure your chest with a tape to get an accurate indication). Vanson’s fit the average height person best, and the overall cut will accommodate a sturdy or muscular build well (not so well for the tall and thin types though). The adjustable waist feature will accommodate a wide variety of waist/belly sizes for a given chest size which makes a good fit pretty easy. If you have a bit of a belly, you’ll want to check your belly with the tape too. Make sure the belly is no bigger than 4” less than the jacket size you’ve selected. For example, a size 48 jacket would handle a max. belly size of about 44. The adjustable waist will snug down to about 10 to 12 inches (for the more trim people out there). Try Vanson’s Sizing Chart for a second opinion on fit. Vanson’s chart is developed for a snug fit, which they recommend.

The Mark 2 Cobra takes all the popular features of the previous Vanson designs and adds a few more. Of course the Mark 2 product line uses the same thick, high quality American cowhide that Vanson is famous for. Their leather will provide the best abrasion protection available. In my opinion, the Mark 2 line represents the “ultimate” in motorcycle leathers. And it looks great too. Notable features for the Cobra Mark 2: zippered “air curtains” in the torso area along with zippered sleeve vents, a three part pant attachment system and an excellent adjustable waist feature. The zippered sleeve vents, along with the perforated front torso can provide a great deal of cooling on hot days. The sleeve vents are made with perforated leather under the sleeve zipper and the air channel extends all the way up to the arm pit, so it really works well. The perforated torso with the adjustable air curtains on the inside works well for climate control for the rest of the jacket. What’s nice is that you can button up all this venting when the weather cools down. This design is as close as it comes to an “all-season” jacket with full leather protection. The Mark 2 line has three connection zippers for pants, one in the rear and two more in front situated on either side of the front main zipper. These are compatible with Vanson’s Technical Sport Pants and Traveler Pants. With this feature we (and you), don’t have to worry about what size jackets will mate up with each pant size—they’ll all work. Vanson’s adjustable waist feature is also excellent. At the sizing information above suggests, it gives a great deal of adjustability around the waist and belly and it is very secure as well.

Options: This Vanson jacket is “armor ready” which means it has an access zipper to install Vanson armor in the shoulders, elbows and back. This jacket will also accept Vanson’s Streamliner Vest which can be used to extend the jacket’s comfortable temperature range. The vest acts as a wind barrier and provides insulation for colder weather.